Arctic 1000 Series 3-Stage 7.5HP Enclosed Air Compressor

FEATURES:

• 3 Stage Artic Compressor Block featuring:
  • Air Cooled with a High Velocity, 10 Bladed Fan
  • Relief Valves on All Stages
  • Aluminium Inter Coolers
  • Stainless Steel After Cooler
  • Interstage and Final Moisture Separators
  • Aluminum Crankcase
  • Forged Steel Crankshaft
  • Cast Iron Cylinders
• Fully Enclosed Sound Dampened Cabinet
• Lift Off Panel Hinges
• Liquid Filled Interstage Pressure Gauges
• Moisture/Carbon Monoxide Visual Indicator
• Double Rubber Vibration Isolation
• Automatic Condensate Drain System
• Pressure Switch
• Hour Meter
• Single or Three Phase Electric Motor
• Emergency Stop Push Button

PURIFICATION:

• 24,000 Cu. Ft. at 80 degrees Fahrenheit filtration system designed to provide C.G.A. Grade “E” breathing air.
• System uses a dryer bed to remove water in excess of dew point –65 degrees. (NFPA 1500 standard)
• Activated charcoal and a carbon monoxide catalyst remove remaining contaminants to provide CGA Grade “E” breathing air.

OPTIONAL FEATURES:

• Real Time Electronic CO Monitor
• Additional Filtration Capacity
• Low Oil Level Shutdown

ELECTRICAL REQUIREMENTS:

The compressor requires a minimum 40 Amp, 230 Volt connection for single-phase operation, and 30 AMP, 230 or 208 Volt connection for three-phase operation

Model	PSI	CFM	HP	Stages	RPM	Weight
E3-5-A	5000	6.5	5	3	1100	600 lbs.
E3-7.5-A	5000	9	7.5	3	1500	610 lbs.
E3-5-A6	6000	5.5	5	3	1100	600 lbs.
E3-7.5-A6	6000	8	7.5	3	1500	610 lbs.